A range of high performance, Reverse Steel Hand Stamp Sets, ideal for when a clear negative impression is required, particularly in moulding or cast applications, to produce a positive or readable inscription on the moulded or cast component.
Suitable for marking Aluminium to Stainless Steel up to a maximum hardness of 38 Rockwell C.
All the stamps in this range are hardened and tempered to precise limits, nickel plated for rust protection thus giving maximum safety in use and long product life.
Punch Size Chart for Reverse Steel Hand Stamp Sets
Reverse steel hand stamps are available in a range of sizes, please use the chart below if you require detailed size information
To be used in connection with the Punch Diagram in the images ribbon. Character Height – measured from the crest of the engraving as shown.
| Character Height | Stamp Length (A) | Square Section (B) | Square Section (C) | ||||
| Metric | Imperial | Metric | Imperial | Metric | Imperial | Metric | Imperial |
| 1.0mm | .040″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 1.5mm | 1/16″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 2.0mm | 5/64″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 2.5mm | 3/32″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 3.0mm | 1/8″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 4.0mm | 5/32″ | 70.0mm | 2.3/4″ | 9.50mm | 3/8″ | 9.50mm | 3/8″ |
| 5.0mm | 3/16″ | 70.0mm | 2.3/4″ | 9.50mm | 3/8″ | 9.50mm | 3/8″ |
| 6.0mm | 1/4″ | 70.0mm | 2.3/4″ | 9.50mm | 3/8″ | 9.50mm | 3/8″ |
| 8.0mm | 5/16″ | 89.0mm | 3.1/2″ | 12.70mm | 1/2″ | 12.70mm | 1/2″ |
| 10.0mm | 3/8″ | 89.0mm | 3.1/2″ | 14.30mm | 9/16″ | 14.30mm | 9/16″ |
| 12.5mm | 1/2″ | 89.0mm | 3.1/2″ | 19.0mm | 3/4″ | 19.0mm | 3/4″ |
